Customize Your Wizard of Wor Multigame Free Play and High Score Save Kit Build your kit exactly how you want it. Choose a Wi-Fi Enabled Kit or a Standard Save Kit. You can also add a processor and/or a 40-pin socket — optional but recommended for easy installation. Learn More About This Kit Click a button below to view detailed information, setup tips, or the full installation guide. Main Features Easy install — No soldering, board modifications, or special wiring. Plug in and play. Permanent score saving — Uses serial EPROM, not failure-prone NVRAM or batteries. High Score Save — Saves Top 5 scores in Wizard of Wor and Top 21 in Robby Roto. Initials entry — Enter your initials on the scoreboard. Attract sounds — Enable sounds at 25%, 50%, or 100% of attract-mode rotations. Freeplay mode — No coins needed, but still supports coin play if desired. Coin Up — Continue using coin play if preferred. Copyright message — Choose original manufacturer or highscoresaves.com branding. Change DIP settings — Menu-driven; no need to open your cabinet to adjust switches. ROM Saver — Eliminates the need for a separate ROM board, improving reliability. Cabinet support — Works in both Upright and Cocktail cabinets. Additional Features Backup & Restore — Save high scores and restore them later, perfect for game room parties. Separate score tables — Wizard of Wor saves by lives chosen; Robby Roto saves by difficulty level (9 levels, 5 tables). Reset button — Restart a game without powering off (requires menu enable + P1 & P2 press). ROM Saver (stack note) — Program/ROM/RAM board must be removed; graphics RAM boards stay in place. Stealth Mode — Boot directly to the game without displaying the DIP settings menu. ROM revisions — Includes the latest ROM revisions for each supported game. Game selection on boot — Choose Wizard of Wor or Robby Roto at startup, or auto-load last played. Important Information Z80 socket required — If your Z80 isn’t socketed, install a 40-pin socket for compatibility. Installation guide — Always review the Installation Guide (PDF) before setup. Wizard of Wor on Robby Roto hardware — Due to PCB limits: no starfield background, no sparkle, no speech. Included Games Wizard of Wor Robby Roto FAQ Do I need to solder anything? No. Installation is plug-and-play. If your Z80 isn’t socketed, install a 40-pin socket first. Wi-Fi vs Standard — what’s the difference? Wi-Fi kits upload/view scores online and sync to your personal page; Standard kits save locally only. Can I upgrade to Wi-Fi later? No. The Wi-Fi hardware must be populated at purchase; there’s no post-purchase upgrade path. How many scores are saved? Wizard of Wor saves Top 5; Robby Roto saves Top 21. Are score tables separate per settings? Yes. WoW saves by lives chosen; Robby Roto saves by difficulty (9 levels across 5 HSS tables). Does it work in Upright and Cocktail cabinets? Yes. The kit supports both cabinet types. Can I back up and restore high scores? Yes. Use Backup & Restore to save scores before events and restore them afterward. How do I use the Reset button? Enable it in the menu; once enabled, press Player 1 + Player 2 to reset without power-cycling. Do I still need the original ROM board? No. The ROM Saver feature runs the program from the kit; remove the Program/ROM/RAM board and keep the graphics RAM boards. Where can I find the Installation Guide? Right here: Wizard of Wor Multigame Installation Guide (PDF) .

Customize Your Gorf Free Play and High Score Save Kit Build your kit exactly how you want it. Choose a Wi-Fi Enabled Kit or a Standard Save Kit. You can also add a processor and/or a 40-pin socket—optional but recommended for easy installation. Learn More About This Kit Click a button to view details, tips, or the installation guide. Key Features Easy installation — No soldering, board modifications, or special wiring. Plug in and go. Permanent score saving — Uses a serial EPROM, not failure-prone NVRAM or batteries. High Score Save — Saves the Top 5 scores. Initial entry — Enter and save your initials. Attract sounds — Enable audio during attract-screen rotations (25%, 50%, or 100%). Freeplay — No coins required; Coin Up still supported. Copyright message — Set to the original manufacturer or HighScoreSaves. Menu-driven DIP settings — Change options without removing the board. ROM saver — Optionally remove program ROMs to reduce power use. Cabinet support — Works in Upright or Cocktail cabinets. Additional Features Backup & restore — Save and restore high scores; ideal before and after parties. Separate score tables — Different high-score tables for lives/difficulty settings (2, 3, 4, or 5 lives). Reset button — Restart a game without powering off (enable in menu; press P1 + P2). Language — Select English or German. No ROM board needed — Improves reliability (remove Program/ROM/RAM board; keep the two graphic RAM boards installed). ROM saver note — Program/ROM/RAM board must be removed; graphic RAM boards remain in the stack. “Hard Romset” mode — Galaxian level plays in Hard Mode; other levels as well. Stealth Mode — Boot straight to game without showing the DIP Settings menu. Improved self-test — Light test, RAM test, and simple pattern board test added. Important Notes Ensure your Z80 is socketed; otherwise install a 40-pin socket for the kit to work. Read the Gorf Installation Guide (PDF) before you begin. Just the FAQ's Does this kit require soldering? No. It is fully plug-and-play with no soldering, board modifications, or special wiring needed. How many high scores are saved? The kit permanently saves the Top 5 scores on your Gorf machine. Can I still use Coin-Up if I enable Freeplay? Yes. Freeplay is supported, and you can still enable Coin-Up if desired. What’s special about the ROM saver? You can remove the Program/ROM/RAM board for reliability and reduced power use. Only the two graphic RAM boards need to remain. Does the kit support multiple languages? Yes. You can select either English or German in the menu settings. What is “Hard Romset” mode? This optional mode sets Galaxian and other levels to Hard difficulty, offering an extra challenge. Where can I download the Installation Guide? Download it here: Gorf Installation Guide (PDF).

Customize Your Space Zap Free Play and High Score Save Kit Build your kit exactly how you want it. Choose a Wi-Fi Enabled Kit or a Standard Save Kit. You can also add a processor and/or a 40-pin socket—optional but recommended for easy installation. Learn More About This Kit Click a button to view details, tips, or the installation guide. Features Easy install – No soldering, board modifications, or special wiring. Plug in and go! Save your scores forever – Uses a serial EPROM (no failure-prone NVRAM or batteries). High Score Save – Saves the Top 5 scores. Initial Entry – Enter your initials with your scores. Attract Sounds – Hear what you’ve been missing; set to 25%, 50%, or 100% of attract rotations. Freeplay – No more coins or opening the coin door. Coin Up – Still supports coins if desired. Copyright Message – Choose original manufacturer or Highscoresaves branding. Change DIP settings – Menu-driven; no cabinet opening required. ROM Saver – No separate ROM board needed, improving reliability. Cabinet support – Works in Upright or Cocktail cabinets. Additional Features Backup and Restore – Back up high scores and restore later (great before/after game-room parties). Separate score tables – Different tables for 2, 3, 4, or 5 lives. Reset Button – Restart a game without powering off (enable in menu; press P1 + P2). No ROM board needed – Program/ROM/RAM board must be removed (graphics RAM boards remain in the stack). Stealth Mode – Boot straight to game without showing the DIP Settings menu. Important Ensure your Z80 is socketed. If not, install a 40-pin socket for the kit to work. Read the Installation Guide (PDF) before installing. Just the FAQ's Do I need to solder anything? No, this kit is plug-and-play. No soldering or board modifications required. Does it save high scores permanently? Yes, high scores are stored in serial EPROM and remain saved without batteries. How many scores are saved? The kit saves the Top 5 scores with initials. Does it allow initials entry? Yes, you can enter your initials with your high scores. Can I enable Freeplay? Yes, Freeplay is supported. Coin Up is still available if desired. Does it support attract sounds? Yes, attract sounds can be set to 25%, 50%, or 100%. Will it work in my cabinet? Yes, the kit supports Upright and Cocktail cabinets. What is Stealth Mode? Stealth Mode lets the kit boot directly into the game without showing the DIP settings menu. Do I need the ROM board installed? No, the program/ROM/RAM board is not required (graphics RAM boards stay in place). Where can I download the installation guide? You can download it here: Space Zap Installation Guide (PDF)

Customize Your Tapper Multigame Free Play and High Score Save Kit Build your kit exactly how you want it. Choose a Wi-Fi Enabled Kit or a Standard Save Kit. You can also add a processor and/or a 40-pin socket—optional but recommended for easy installation. Learn More About This Kit Click a button to view details, tips, or the installation guide. Cabinet Controls Your Tapper cabinet has one tap “spout” control; Timber normally uses two buttons (chop left/right). This kit maps controls so each game plays correctly with your panel. If installed in a Tapper cabinet (playing Timber) 1 player only for Timber Tap + move joystick left = chop left Tap + move joystick right = chop right If installed in a Timber cabinet (playing Tapper) Tapper uses Player 1 joystick; “chop” left/right act as tap Supports 2-player simultaneous Timber Features Easy install – No soldering, board mods, or special wiring. Plug into Tapper or Timber PCB. Save your scores forever – Uses a serial EPROM (not failure-prone NVRAM or batteries). High Score Save – Saves Top 10 scores (optionally Top 3). Separate score tables – Different HSS for each of the four game menus. Attract Sounds – Adjustable at 25%, 50%, or 100% of attract rotation. Freeplay – No more coins or opening the coin door. Coin Up – Still supports coins if desired. Attract Mode – Reduces screen burn; optional sound. Menu-driven DIP – Change DIP settings on-screen; no cabinet opening required. ROM Saver – Original program ROMs may be removed. Cabinet support – Works in Upright, Cocktail, or Cabaret. Backup & Restore – Save/restore scores (great before/after parties). Reset Button – Restart a game without power-cycling (enable in menu). ROM Revisions – Uses the latest revisions. Choose boot game – Tapper, Timber, Root Beer Tapper, or Simpsons Tapper. Additional Features Choose starting lives in the menu. Select bonus life threshold (10,000 / 20,000 / 40,000 / 80,000). Separate high-score table for each lives setting. Show original Midway logos or website branding. Menus for normal DIP vs custom settings. Option to lock the sub-menu so guests can’t change settings. Stealth Mode – Boot to last played game or a selected title. Game List Tapper Timber Root Beer Tapper Simpsons Tapper Important Ensure your Z80 is socketed. If not, install a 40-pin socket for this kit to work. Read the Installation Guide (PDF) before installing. Just the FAQ's Do I need to solder anything? No, this kit is plug-and-play. No soldering or board modifications required. Does it save my high scores? Yes, it saves the Top 10 scores, and you can optionally set it to Top 3. How does it handle cabinet controls? Controls are automatically mapped for Tapper or Timber cabinets so both games play correctly. Can I still use coins? Yes, the kit supports both Freeplay and Coin Up modes. Does it work with different cabinet types? Yes, it supports Upright, Cocktail, and Cabaret cabinets. What games are included? Tapper, Timber, Root Beer Tapper, and Simpsons Tapper. Can I back up and restore scores? Yes, you can back up and restore your high scores—ideal for events or parties. What is Stealth Mode? It allows the kit to boot directly to the last played game or a chosen title. What processor does it require? A socketed Z80 CPU is required for this kit to function. Where can I find the installation guide? You can download it here: Tapper Multigame Installation Guide (PDF)

Customize Your Rally X Multigame High Score Save Kit Build your kit exactly how you want it. Choose a Wi-Fi Enabled Kit or a Standard Save Kit. You can also add a processor and/or a 40-pin socket—optional but recommended for easy installation. Learn More About This Kit Click a button to view details, tips, or the installation guide. Features Easy install: No soldering, board modifications, or special wiring—plug in and go. Save your scores forever: Uses a serial EEPROM (not failure-prone NVRAM or batteries). High Score Save: Stores the Top 5 scores. Copyright: Switch between NAMCO or HighScoreSaves branding on the attract screen. Attract sounds: Enable at 25%, 50%, or 100% of attract-screen rotations. Free Play: Start games without coins or opening the coin door. Coin Up: Coins/tokens still supported if desired. Attract mode: Reduce screen burn—no more static screens. Menu-driven DIP settings: Change settings on-screen—no cabinet pull-out. ROM Saver: Optionally remove original program ROMs to save power. Cabinet support: Works in upright or cocktail cabinets. Additional Features Initial entry: Enter initials with your high score. High-score tables with initials: Save up to 16 combinations of tables (lives and bonus options). Important Graphics ROM setting: After installing the Rally X save kit, open the settings menu and set your GFX ROMs option to “Multikit”. Ensure your Z80 is socketed. If not, install a 40-pin socket for the kit to work. Read the installation guide (PDF) before installing. Game List Rally X New Rally X Jr. Rally X FAQ Do I need to solder anything? No, this is a plug-and-play kit—no soldering or board mods required. Will my scores be saved permanently? Yes. Scores are stored in EEPROM and do not require batteries. How many high scores are saved? Top 5 scores are saved with initials. Can I switch the attract-screen branding? Yes—choose NAMCO or HighScoreSaves branding in the menu. Does it support Free Play and coins? Yes—enable Free Play or continue to Coin Up with tokens/coins. Does this help reduce screen burn-in? Yes—attract mode prevents static screens to minimize burn-in. How do I change DIP switch options? All options are menu-driven on-screen—no cabinet pull-out needed. What is the “Multikit” GFX ROMs setting? After install, set GFX ROMs to Multikit in the settings so graphics map correctly for the multigame kit. Do I need a socketed CPU? Yes—the Z80 must be socketed. If not, add a 40-pin socket first. Where can I download the installation guide? You can download it here: Rally X Multigame Installation Guide (PDF)