Darksoft CPS1 Accessories
Darksoft CPS1 accessories support the installation and operation of Darksoft CPS1 multigame kits on original Capcom CPS1 arcade hardware. These products are intended as supporting components and are not standalone multigame kits.
Darksoft CPS1 | CPS2 | Taito F3 LCD Protector
LCD Protector Case for Darksoft CPS1, CPS2, and Taito F3 Multigame Kits Need an LCD protector case for your Darksoft multigame kit? This snap-fit LCD protector case is designed to securely house the LCD selector screen used on Darksoft CPS1, Darksoft CPS2, and Darksoft Taito F3 multigame kits. Assembly requires no additional hardware—simply seat the LCD into the rear housing and snap the front portion of the case into place. The enclosure includes an integrated rear stand that positions the LCD at an ideal viewing angle for installation inside a coin door or cabinet interior. Cable length requirements may vary by cabinet layout; longer LCD extension cables are available separately if needed. This enclosure is produced with a textured 3D print finish for improved appearance and durability. Please review the product photos for surface detail—this finish provides a cleaner, more professional look than standard smooth 3D printed cases. Included 1 × LCD protector case body 1 × integrated rear stand This is a 3D printed LCD protector enclosure designed specifically for the LCD selector screens used with Darksoft CPS1, CPS2, and Taito F3 multigame kits. This product is a supporting accessory and does not function independently. The LCD screen and connecting cables are not included.
Darksoft CPS1 | CPS2 | Taito F3 Long Flat Cable
LCD Extension Cable for Darksoft CPS1, CPS2, and Taito F3 Multigame Kits This LCD extension cable is designed to support the LCD selector screens used with Darksoft CPS1, Darksoft CPS2, and Darksoft Taito F3 multigame kits. It allows the LCD display to be mounted farther from the multigame board, providing greater flexibility when installing the screen inside a coin door or arcade cabinet interior. This accessory is intended as a supporting component and does not function independently without a compatible Darksoft multigame kit. What’s Included 1 × LCD extension cable — approximately 3 feet (100 cm) in length, equipped with the correct 7×2 female connectors for direct plug-and-play use
Compatibility and Usage Notes
- Platform compatibility: These accessories are intended for use with Capcom CPS1 hardware. They are commonly used with original CPS1 game boards as well as CPS1 multigame systems , depending on the accessory type.
- Accessory-specific fit: Compatibility varies by accessory (kick harnesses, wiring adapters, audio or video components). Always review the individual product description before ordering.
- Board revisions matter: CPS1 hardware exists in multiple PCB revisions and configurations. Some accessories may only apply to specific board layouts.
- Dedicated versus conversion cabinets: Converted cabinets may have altered wiring or power setups. Verify pinouts, grounding, and audio routing prior to installation.
- JAMMA considerations: CPS1 typically uses JAMMA for core signals, but additional wiring may be required for certain controls or cabinet configurations.
- Voltage and power: Confirm stable and correct power supply voltages before connecting accessories. Improper voltage or miswiring can permanently damage CPS1 boards.
- Installation responsibility: Most accessories are plug-in, but connector orientation is critical. Never force a connection—stop and re-check alignment if resistance is encountered.
- Best practice: Always power off the cabinet before installing or removing any CPS1 accessories or harnesses.
If you are unsure which accessory is correct for your CPS1 setup, contact us with clear photos of your CPS1 boards, cabinet wiring, and existing harness connections so we can help confirm compatibility before ordering.