Arcade Parts

Ms. Pac-Man Cabaret Control Panel Overlay (CPO) This Ms. Pac-Man Cabaret Control Panel Overlay (CPO) is a direct replacement for the original overlay used on dedicated Ms. Pac-Man cabaret arcade cabinets. Designed to closely match the factory artwork, this reproduction overlay allows collectors and restorers to bring worn or damaged control panels back to their original appearance. Many original control panel overlays fade, peel, or become damaged after decades of use. This high-quality reproduction restores the correct look and feel of the classic Ms. Pac-Man cabaret control panel while maintaining accurate dimensions and artwork placement. Key Features Silk-screened artwork for authentic arcade appearance Faithful reproduction of the original Ms. Pac-Man cabaret CPO 3M adhesive backing for secure and long-lasting installation Designed specifically for dedicated Ms. Pac-Man cabaret cabinets Ideal for arcade restoration and cabinet refurbishment Dimensions Width: 15 3/4 inches Height: 6 3/8 inches Once installed, this overlay restores the original look of the control panel while protecting the surface from wear during gameplay.

Nintendo Rainbow Power Cable The Nintendo Rainbow Power Cable (Part #DJR-89-11) is a replacement 10-pin power harness used in classic Nintendo arcade machines that utilize a two-board stack design. This cable connects the CPU board to the Video board, delivering the necessary power and signal connections required for proper operation. On original Nintendo arcade hardware, the colorful wiring of this harness earned the nickname "Rainbow Cable". Over time, original cables can become brittle, damaged, or unreliable due to age and heat exposure. Replacing the cable ensures stable power delivery between the boards and helps prevent intermittent issues or system failures. This harness is designed to match the original connector style and wiring layout used in Nintendo arcade cabinets, making it an ideal replacement part for arcade PCB repair, troubleshooting, and full cabinet restorations. Key Features Replacement Nintendo Rainbow Power Cable Original-style 10-pin harness connector Connects CPU board to Video board in Nintendo two-board stacks Improves reliability of aging Nintendo arcade hardware Ideal for arcade PCB repair and cabinet restoration Compatible With Donkey Kong Donkey Kong Jr. Donkey Kong 3 Mario Bros. Popeye This cable is commonly used in Nintendo arcade systems that feature a stacked PCB design where the CPU board and video board are connected through a dedicated harness.

Arcade PCB Mounting Feet Kit This PCB mounting feet kit provides a simple and reliable way to secure arcade circuit boards inside a cabinet. These plastic stand-offs elevate the PCB slightly above the mounting surface, helping protect the board from shorts, vibration, and damage caused by direct contact with the cabinet or mounting panel. Properly mounting a PCB is important for long-term reliability. Using mounting feet keeps the board stable while also allowing airflow beneath the PCB, which can help reduce heat buildup during operation. Kit Includes 4 white PCB mounting feet 4 mounting screws Installation Notes Designed to raise the PCB off the mounting surface for protection Helps prevent shorts and accidental contact with cabinet hardware Recommended for arcade PCB installations, repairs, and restorations We recommend using these mounting feet whenever installing or replacing an arcade PCB to ensure the board is properly supported and secured inside the cabinet.

Arcade PCB Stand-Off Mounting Kit This PCB stand-off mounting kit is designed to securely mount and space arcade circuit boards inside a cabinet. The included spacers elevate the PCB above the mounting surface, helping prevent shorts while providing proper clearance for stacked boards or extension kits. These stand-offs are commonly used when installing multigame kits or extension boards that require additional spacing between PCBs. They are ideal for many classic arcade boards and help keep the hardware stable and properly aligned inside the cabinet. Kit Includes 8 × 25 mm PCB stand-offs 4 × 60 mm mounting bolts 4 × 3 mm mounting nuts Commonly Used With Games Such As Tutankham Time Pilot Gyruss Frogger and other classic arcade PCBs Notes Ideal for multigame kit extensions and stacked PCB installations Helps prevent electrical shorts by raising the PCB off the mounting surface Color of stand-offs may be black or white depending on stock Using proper stand-offs helps protect your arcade boards and ensures a clean, stable installation inside the cabinet.

DK / DK Jr. Pin-Harness to Card-Edge Adapter This adapter converts the original pin-style cabinet wiring harness found in classic Donkey Kong and Donkey Kong Jr. cabinets to the newer card-edge connector used on later Nintendo board sets—making swaps and upgrades fast and reversible. Key Features Direct, plug-in conversion from pin-header harness to card-edge connector. No cutting or permanent changes to the original cabinet wiring. Clean signal routing for power, video, audio, and controls. Keyed/marked orientation to help prevent mis-connection. Compatibility Cabinets: Nintendo DK and DK Jr. with pin-style harness. Boards: Later Nintendo board sets using a card-edge connector (verify your specific PCB before installation). Installation Notes Power off the cabinet before connecting or removing the adapter. Match orientation/keys and seat connectors fully; avoid forcing the edge. No soldering required for standard harnesses. Tip: Check your cabinet’s wiring diagram and the target PCB pinout to confirm signal order before first power-on.

Z80 8-Bit Microprocessor (40-Pin CPU) The Z80 is a classic 8-bit microprocessor widely used in arcade machines from the late 1970s through the 1980s. This processor served as the main CPU in many arcade PCBs, executing game code, processing player inputs, and coordinating communication with memory, sound hardware, and video circuitry. The Z80 became one of the most popular processors in arcade hardware due to its reliability and expanded instruction set compared to earlier CPUs. Because of its widespread use, the Z80 is commonly found in a variety of classic arcade games and remains an essential component when repairing or restoring vintage arcade boards. This processor uses a standard 40-pin DIP (Dual In-line Package) and installs directly into a compatible socket on the arcade PCB. Replacing a faulty CPU can often resolve boot failures, lockups, or other operational issues in aging arcade hardware. Key Features Z80 8-bit microprocessor Standard 40-pin DIP package Common CPU used in many classic arcade PCBs Handles core game logic, timing, and system control Ideal for arcade PCB troubleshooting, repair, and restoration Used In Arcade Games Such As Donkey Kong Galaga Donkey Kong Jr. Frogger Galaxian Dig Dug Xevious …and many other classic arcade titles Installation Notes Installs into a standard 40-pin DIP socket on compatible arcade PCBs Ensure correct notch orientation when installing the CPU Recommended for technicians performing arcade board repair or restoration *Manufacturer brands or markings may vary.